Garage door spring replacement costs $150 to $350 for one, $300 to $700 for a pair in 2026
Replacing one torsion spring runs $150 to $350 installed. Replacing both, which every technician will recommend, runs $300 to $700. The spring itself costs $30 to $100. The rest is a trained tech winding it safely, plus the $75 to $150 service call. Anything over $800 for a pair of standard springs is too much.
Cost by job
| One torsion spring | $150 to $350 |
|---|---|
| Pair of torsion springs (recommended) | $300 to $700 |
| Pair of extension springs (side mounted) | $100 to $250 |
| High cycle springs, pair (25,000 cycles) | $400 to $850 |
| Springs plus cables and rollers | $450 to $900 |
| Spring on a double or oversized door | $350 to $800 |
| Same day or after hours spring call | $350 to $900 |
What to know before you book
| The $1,800 quote | In a widely read Reddit thread a homeowner signed for $1,800 to replace two springs. The fair price was $300 to $700. Springs are the most overquoted garage door repair because the door will not open and people pay to make the problem go away. Get a second quote by phone; most companies will price a spring job without seeing it. |
|---|---|
| Replace one or both? | Both. Springs are sized as a pair and wear at the same rate. The second one usually fails within months, and you pay the service call twice. |
| Torsion vs extension | Torsion springs sit on a bar above the door and cost more. Extension springs run along the side tracks, cost less, and are more common on older or lighter doors. |
| How long they last | About 10,000 cycles, which is 7 to 10 years for most homes. High cycle springs are rated for 25,000 cycles and cost $50 to $100 more per pair. |
| Is it the spring? | Look above the door. A gap in the coil means the spring is broken. If the opener hums and the door does not move, or the door is very heavy to lift by hand, it is the spring, not the opener. |
| Do not do this yourself | A wound torsion spring stores enough energy to break bones. It is the one garage door job that regularly sends people to the emergency room. Pay the tech. |
Why it costs what it costs
The part is cheap and the job takes 30 to 60 minutes. What you pay for is the winding. A torsion spring has to be wound to the exact tension for the door's weight, with the right bars, by someone who knows where to stand. Companies price that skill and risk, and because the door is stuck, some price it much higher than it deserves.
What will this cost me?
Pick the job, your state's cost level and when you need it. The estimate updates as you change them.
Estimates from published 2026 cost guides. Get a written quote before work starts.
The one business per trade, per town that AI recommends.
When your customers ask an AI which company to call, we get you named, not your competitor. We work and monitor every major engine, ChatGPT, Google's AI Overviews, Gemini, Perplexity, Copilot, Claude, and Grok, so you show up wherever they ask. Fully done-for-you: setup, ongoing optimization, competitor tracking, a live dashboard, and monthly reporting. Backed by our 90-day money-back guarantee.
Book a free 15 minute callNo pitch deck. We run your audit live on the call.Common questions
How much does it cost to replace a garage door spring?
$150 to $350 for one torsion spring and $300 to $700 for a pair, installed, in 2026.
Can I replace a garage door spring myself?
No. Torsion springs are under extreme tension and injure people every year. Extension springs are safer but still need the door propped and safety cables fitted.
How long does a garage door spring last?
About 10,000 cycles, roughly 7 to 10 years at three or four uses a day. High cycle springs last 25,000 cycles.
How long does a spring replacement take?
30 to 60 minutes for a pair. If the tech is there over two hours, something else is wrong.
Why did I get quoted $1,000 or more?
Because the door is stuck and they expect you to pay. Call two more companies and ask for a price over the phone.